Johnson Matthey Highlights: January 2016
Johnson Matthey Highlights: January 2016
A selection of recent publications by Johnson Matthey R&D staff and collaborators
EMISSION CONTROL TECHNOLOGIES
A Comparative Study of N2O Formation During the Selective Catalytic Reduction of NOx with NH3 on Zeolite Supported Cu Catalysts
H.-Y. Chen, Z. Wei. M. Kollar, F. Gao, Y. Wang, J. Szanyi and C. H. F. Peden, J. Catal., 2015, 329, 490 LINK http://dx.doi.org/10.1016/j.jcat.2015.06.016
The decreased N2O formation on the small pore zeolite, Cu-CHA, in the SCR of NOx with NH3 was studied by comparing with a large pore Cu-BEA zeolite catalyst. The N2O yield rises with a rise in the NO2/NOx ratios of the feed gas for both catalysts, implying N2O is formed via the decomposition of NH4NO3. TPD showed that NH4NO3 was more stable on Cu-CHA compared to Cu-BEA. Surface nitrate groups are vital for NH4NO3 formation and this was confirmed by in situ FTIR spectra on the stepwise (NO2 + O2) and (15NO + NH3 + O2) adsorption and reaction, and product distribution analysis using isotope-labelled reactants. Cu-CHA was found to be significantly less active than Cu-BEA in catalysing NO oxidation and the later formation of surface nitrate groups.
Local Organization of Fe3+ into Nano-CeO2 with Controlled Morphologies and its Impact on Reducibility Properties
I. Moog, C. Feral-Martin, M. Duttine, A. Wattiaux, C. Prestipino, S. Figueroa, J. Majimel and A. Demourgues, J. Mater. Chem. A, 2014, 2, (47), 20402 LINK http://dx.doi.org/10.1039/c4ta02631d
Ce1−x Fex O2−x/2 solid solutions were prepared by two different methods. Surface area, lattice parameter, particle shape and local Fe3+ organisation were found to depend on the preparation method and the Fe content. A microwave preparation method was used and caused a large amount of Fe3+ to exist in isolated distorted octahedral sites affecting a large number of Ce4+ nearest neighbours and leading to highly mobile oxygen vacancies. Therefore these samples had a lower solubility limit and a larger variation of the cell parameter compared to conventionally prepared samples. The findings can be extended to provide understanding of reactivity and redox properties (for automotive exhaust catalysts and photocatalysis), ionic conductivity (for solid oxide fuel cells) and magnetic interactions (for spintronic applications) in other transition metals.
Thermochemical Recovery Technology for Improved Modern Engine Fuel Economy – Part 1: Analysis of a Prototype Exhaust Gas Fuel Reformer
D. Fennell, J. Herreros, A. Tsolakis, K. Cockle, J. Pignon and P. Millington, RSC Adv., 2015, 5, (44), 35252 LINK http://pubs.rsc.org/en/Content/ArticleLanding/2015/RA/C5RA03111G#!divAbstract
In this study exhaust energy is captured from a high temperature engine exhaust stream to aid catalytic endothermic fuel reforming reactions where hydrocarbon fuel is converted to hydrogen-rich reformate. The reformate is then reused in the engine, providing a source of hydrogen to improve the engine combustion process – known as the reformed exhaust gas recirculation (REGR). This method has much potential for modern gasoline direct injection (GDI) engines. A full scale gasoline prototype reformer incorporated with a multi-cylinder GDI engine was presented by the authors. The prototype reformer performance was analysed by the reformate composition, the temperature distribution across the catalyst, the reforming process efficiency and the amount of exhaust heat recovery accomplished.
FINE CHEMICALS: API MANUFACTURING
Palladium-Catalyzed α-Arylation Reactions in Total Synthesis
S. T. Sivanandan, A. Shaji, I. Ibnusaud, C. C. C. Johansson Seechurn and T. J. Colacot, Eur. J. Org. Chem., 2015, (1), 38 LINK http://dx.doi.org/10.1002/ejoc.201403301
Palladium-catalysed α-arylation of carbonyl compounds is a powerful new methodology for synthesising natural products and active pharmaceutical ingredients (APIs). Increased yields, improved scope, decreased number of steps and alternative starting materials are all made possible. This microreview highlights the importance of the method for a number of challenging examples, and raises to the attention of synthetic chemists the value of palladium-catalysed α-arylation as a key step in choosing a route to structurally important molecules.
NEW BUSINESSES: BATTERY TECHNOLOGIES
Synthesis of Multimodal Porous ZnCo2O4 and its Electrochemical Properties as an Anode Material for Lithium Ion Batteries
S. Hao, B. Zhang, S. Ball, M. Copley, Z. Xu, M. Srinivasan, K. Zhou, S. Mhaisalkar and Y. Huang, J. Power Sources, 2015, 294, 112 LINK http://dx.doi.org/10.1016/j.jpowsour.2015.06.048
A simple method to synthesise multimodal porous ZnCo2O4 microspheres through PVP assist solvothermal self-assembling process was proposed by the authors. This was then characterised by XRD, SEM, TEM and XPS, and a potential formation mechanism was suggested. Lithium ion batteries were fabricated using the ZnCo2O2 microspheres as an anode material. The results show that the porous microstructure gives an outstanding electrochemical performance with high capacity and long-life cycling stability. A large reversible capacity of 940 and 919 mAh g−1 was retained after 100 cycles at a low charge-discharge rate of 0.1 C and 0.2 C (100 and 200 mA g−1) respectively.
NEW BUSINESSES: FUEL CELLS
Platinum/Carbide Interactions: Core-Shells for Catalytic Use
J. L. R. Yates, G. H. Spikes and G. Jones, Phys. Chem. Chem. Phys., 2015, 17, (6), 4250 LINK http://dx.doi.org/10.1039/C4CP04974H
Various transition metal carbides were studied by DFT for possible application as core materials in core-shell nanoparticulate fuel cell catalysts. The fcc forms of TiC, NbC, TaC and hcp WC were selected and compared to β SiC. The interaction of model surfaces with Pt were calculated. Pt overlayers on carbides were found to be thermodynamically feasible. The results were explained in terms of the modulation of the carbide and Pt electronic structures. WC and SiC were found to support Pt overlayers and therefore may be suitable for Pt encapsulation. Pt adsorption took place on fcc (111) carbide surfaces in all cases, but not on fcc (100). The carbide supports also affected oxygen binding on the Pt overlayer, the implications for the ORR are discussed. WC may be most suitable for a core material. Several of the Pt–WC surfaces showed reduced oxygen adsorption energies, and should provide similar ORR activity to Pt catalysts.
PRECIOUS METAL PRODUCTS: NOBLE METALS
TEM Characterization of Simultaneous Triple Ion Implanted ODS Fe12Cr
V. de Castro, M. Briceno, S. Lozano-Perez, P. Trocellier, S. G. Roberts and R. Pareja, J. Nucl. Mater., 2014, 455, (1–3), 157 LINK http://dx.doi.org/10.1016/j.jnucmat.2014.05.064
To aid the design of advanced fusion reactors it is important to understand the behaviour of oxide dispersion strengthened (ODS) ferritic/martensitic steels under irradiation. TEM was used to investigate the effects of irradiation on a simultaneous triple ion implanted ODS Fe12Cr steel. The grain and dislocation structures, oxide nanoparticles and other secondary phases present in the steel were the focus of the study. Irradiation of the ODS steel was carried out at room temperature using Fe8+, He+ and H+ at the JANNUS-Saclay facility to a damage of 4.4 dpa. The ODS nanoparticles had high stability under these irradiation conditions.
The Adsorption of Ethene on Fe(1 1 1) and Surface Carbide Formation
S. Booyens, L. Gilbert, D. Willock and M. Bowker, Catal. Today, 2015, 244, 122 LINK http://dx.doi.org/10.1016/j.cattod.2014.06.025
During Fischer-Tropsch synthesis of higher hydrocarbons from synthesis gas (CO + H2), ethylene is adsorbed and decomposed on a Fe(1 1 1) surface. This investigation into the nature of the process used a molecular beam reactor and XPS. At a range of substrate temperatures (373–873 K), ethylene was found to decompose fully to atomic carbon and gas phase hydrogen, and carbon deposited on the surface was found to undergo fast diffusion into the subsurface region leaving surface sites free. Fast carbon removal could be achieved with oxygen above ~600 K; the carbon was evolved as CO, with no evidence of CO2 production. CO on the surface at those temperatures has a very short lifetime.
Dual Doping Effects (Site Blockage and Electronic Promotion) Imposed by Adatoms on Pd Nanocrystals for Catalytic Hydrogen Production
S. Jones, S. M. Fairclough, M. Gordon-Brown, W. Zheng, A. Kolpin, B. Pang, W. C. H. Kuo, J. M. Smith and S. C. E. Tsang, Chem. Commun., 2015, 51, (1), 46 LINK http://dx.doi.org/10.1039/C4CC06195K
Doping of metal nanoparticles with additives such as polymers or metallic adatoms can be used to optimise the electronic and geometric properties of catalytic materials. Rational nanocatalyst design can be improved by a greater understanding of doping effects at the atomic level interaction(s). Using the decomposition of HCOOH to H2/CO2 over metallic Pd nanoparticles as a probe reaction, three different metal additives were studied: Bi, Te and Ag. Each was found to produce a different doping effect. Bi atoms reside on higher index sites, leading to reduced HCOOH dehydration; Te atoms occupy terrace sites, reducing the rate of dehydrogenation; Ag atoms are not site specific and at high coverage, their strong electronic effects promote activity on the decreased number of surface Pd sites.
Effect of Mill Type on the Size Reduction and Phase Transformation of Gamma Alumina
S. R. Chauruka, A. Hassanpour, R. Brydson, K. J. Roberts, H. Ghadiri and H. Stitt, Chem. Eng. Sci., 2015, 134, 774 LINK http://dx.doi.org/10.1016/j.ces.2015.06.004
The impact of size reduction mechanisms on Ɣ-Al2O3 catalyst support brought about by various stress modes was investigated. Three different mill types were studied and air jet milling was found to be most efficient in decreasing particle size from d90 of 37 µm to 2.9 µm in comparison with planetary ball milling (30.2 µm) and single ball milling (10.5 µm). The samples were characterised by XRD and TEM. Phase transformation to the undesirable α-Al2O3 occurs during planetary ball milling, therefore, there is a big decrease in the surface area from 136.6 m2 g−1 to 82.5 m2 g−1 as shown by the BET method. This was caused by the large shear stresses under high shear rates.
Discrete Element Modelling (DEM) Input Parameters: Understanding their Impact on Model Predictions Using Statistical Analysis
Z. Yan, S. K. Wilkinson, E. H. Stitt and M. Marigo, Comp. Part. Mech., 2015, 2, (3), 283 LINK http://link.springer.com/article/10.1007/s40571-015-0056-5
In the DEM, the choice of the particle property input parameters and/or their cross-correlation presents a difficulty. The authors study the effect of the DEM input particle properties on the bulk responses for the discharge of particles from a flat bottom cylindrical container onto a plate using a parametric multi-level sensitivity process. Particle properties such as Young's modulus, friction parameters and coefficient of restitution were altered to investigate the impact on material repose angles and particle flow rate. Both the final angle of repose and particle flow rate are determined by inter-particle static friction followed by inter-particle rolling friction coefficient. The suggested process gives a systematic method that can be used to demonstrate the significance of particular DEM input parameters for a chosen system and then possibly aid their selection or calibration.
Understanding the Structure Directing Action of Copper-polyamine Complexes in the Direct Synthesis of Cu-SAPO-34 and Cu-SAPO-18 Catalysts for the Selective Catalytic Reduction of NO with NH3
A.Turrina, E. C. V. Eschenroeder, B. E. Bode, J. E. Collier, D. C. Apperley, P. A. Cox, J. L. Casci and P. A. Wright, Microporous Mesoporous Mater., 2015, 215, 154 LINK http://dx.doi.org/10.1016/j.micromeso.2015.05.038
The direct synthesis of Cu-containing microporous SAPO materials using complexed Cu2+ cations in linear polyamines was investigated. The authors studied the complexing ligands: DETA, HEEDA, TETA, 232, 323, TEPA and PEHA. A comparative exercise of the syntheses was undertaken using analogous Ni-polyamine complexes. Both SAPO-18 and SAPO-34 materials were prepared using Cu2+ and Ni2+. SAPO-18 was prepared with Cu2+ (232), Ni2+ (232) and Ni2+ (TETA) but the majority of the polyamine complexes were prepared by direct crystallisation to SAPO-34. UV-visible, EPR spectroscopy and computer simulation were used to investigate the coordination geometry of the complexes. SAPO-18 was preferred by the smaller square planar complexes or octahedral species (with two water molecules) of 232 and TETA. The extra-framework Cu2+ and Ni2+ cations in SAPO-18 and SAPO-34 frameworks were caused by calcination. Thermal template degradation happens via nitrile intermediates in Ni-SAPO-18 and was shown by in situ synchrotron IR spectroscopy. The extra-framework Cu2+ and Ni2+ cations freed by calcination were located by Rietveld structural analysis.