Introduction Platinum group metals (pgms) have widespread applications as functional materials in many different industries. The applications range from catalytic surfaces or particles, sensors, biomedical imaging or drug delivery systems and thermocouples up to jewellery items that we use for special moments of our life. The pgms are used as solid bulk materials, powders, thin films,...

It is known that platinum-rhodium thermocouples exhibit mass loss when in the presence of oxygen at high temperatures due to the formation of volatile oxides of platinum and rhodium. The mass losses of platinum, Pt-6%Rh and Pt-30%Rh wires, commonly used for thermocouples, were considered in this paper to characterise the mass loss of wires of the three compositions due to formation and evaporation of the oxides PtO₂ and RhO₂ under the conditions that would be seen by thermocouples used at high temperature. For the tests, the wires were placed in thin alumina tubes to emulate the thermocouple format, and the measurements were performed in air at a temperature of 1324°C, i.e. with oxygen partial pressure of 21.3 kPa. It was found that the mass loss of the three wires increases linearly with elapsed time, consistent with other investigations, up to an elapsed time of about 150 h, but after that, a marked acceleration of the mass loss is observed. Remarkably, previous high precision studies have shown that a crossover after about 150 h at 1324°C is also observed in the thermoelectric drift of a wide range of platinum-rhodium thermocouples, and the current results are compared with those studies. The mass loss was greatest for Pt-30%Rh, followed by Pt6%Rh, then platinum.

Ruthenium tablets with mean grain size of ~4–5 μm were prepared by vacuum hot pressing (VHP), and tablets with maximum density of 12.2 g cm^–3 were obtained with sintering time of 2 h. X-ray diffraction (XRD) revealed that there was a texture change with sintering time. The microstructure of the ruthenium tablets was observed by electron backscatter diffraction (EBSD) and field emission scanning electron microscopy (FSEM). The microstructure evolution of ruthenium with sintering time is discussed.

Platinum-based alloys are being developed for high-temperature applications with the aim of replacing some of the currently used nickel-based superalloys (NBSAs) and benchmark alloy, PM2000. The platinum-based superalloys have a similar structure to the NBSAs and can potentially be used at higher temperatures and in more aggressive environments because platinum is more chemically inert and has a higher melting point. In this paper, the recent progress in research and development of platinum-based superalloys is overviewed. Firstly, the composition optimisation and structural design of platinum-base superalloys are introduced. The structural characteristics, mechanical properties, oxidation resistance and corrosion behaviour of platinum-aluminium ternary, quaternary and multiple superalloys are summarised. Finally, directions for further research and application of platinum-based superalloys are analysed and prospected.