oa SAE 2011 World Congress

References

1. SAE International,: http://www.sae.org/ (Accessed on 6th February 2012)
2. T. V. Johnson, ‘Diesel Emissions in Review’, SAE Paper 2011-01-0304 [Google Scholar]
3. J. R. Theis, M. Dearth, R. McCabe, ‘LNT + SCR Catalyst Systems Optimized for NOx Conversion on Diesel Applications’, SAE Paper 2011-01-0305 [Google Scholar]
4. L. Xu, R. McCabe, P. Tennison, H.-W. Jen, ‘Laboratory and Vehicle Demonstration of “2nd-Generation” LNT + in-situ SCR Diesel Emission Control Systems’, SAE Paper 2011-01-0308 [Google Scholar]
5. H. Hirabayashi, T. Furukawa, W. Koizumi, W. Koyanagi, Y. Saitou, S. Tanaka, ‘Development of New Diesel Particulate Active Reduction System for Both NOx and PM Reduction’, SAE Paper 2011-01-1277 [Google Scholar]
6. L. Rocher, T. Seguelong, V. Harle, M. Lallemand, M. Pudlarz, M. Macduff, ‘New Generation Fuel Borne Catalyst for Reliable DPF Operation in Globally Diverse Fuels’, SAE Paper 2011-01-0297 [Google Scholar]
7. S. Iwasaki, T. Mizutani, Y. Miyairi, K. Yuuki, M. Makino, ‘New Design Concept for Diesel Particulate Filter’, SAE Paper 2011-01-0603 [Google Scholar]
8. T. Boger, J. Jamison, J. Warkins, N. Golomb, C. Warren, A. Heibel, ‘Next Generation Aluminum Titanate Filter for Light Duty Diesel Applications’, SAE Paper 2011-01-0816 [Google Scholar]
9. T. Boger, S. He, T. Collins, A. Heibel, D. Beall, C. Remy, ‘A Next Generation Cordierite Diesel Particle Filter with Significantly Reduced Pressure Drop’, SAE Paper 2011-01-0813 [Google Scholar]
10. A. Heibel, ‘Advancements in Substrate Technology’, SAE 2010 Heavy Duty Diesel Emissions Control Symposium, Gothenburg, Sweden, 21st–22nd September, 2010 [Google Scholar]
11. K. Tsuneyoshi, O. Takagi, K. Yamamoto, ‘Effects of Washcoat on Initial PM Filtration Efficiency and Pressure Drop in SiC DPF’, SAE Paper 2011-01-0817 [Google Scholar]
12. C. Henry, N. Currier, N. Ottinger, A. Yezerets, M. Castagnola, H.-Y. Chen, H. Hess, ‘Decoupling the Interactions of Hydrocarbons and Oxides of Nitrogen over Diesel Oxidation Catalysts’, SAE Paper 2001-01-1137 [Google Scholar]
13. C. H. Kim, M. Schmid, S. J. Schmieg, J. Tan, W. Li, ‘The Effect of Pt-Pd Ratio on Oxidation Catalysts under Simulated Diesel Exhaust’, SAE Paper 2011-01-1134 [Google Scholar]
14. A. Williams, R. McCormick, J. Luecke, R. Brezny, A. Geisselmann, K. Voss, K. Hallstrom, M. Leustek, J. Parsons, H. Abi-Akar, ‘Impact of Biodiesel Impurities on the Performance and Durability of DOC, DPF and SCR Technologies’, SAE Paper 2011-01-1136 [Google Scholar]
15. Y. Aoki, S. Sakagami, M. Kawai, N. Takahashi, T. Tanabe, T. Sunada, ‘Development of Advanced Zone-Coated Three-Way Catalysts’, SAE Paper 2011-01-0296 [Google Scholar]
16. D. Ball, M. Zammit, J. Wuttke, C. Buitrago, ‘Investigation of LEV-III Aftertreatment Designs’, SAE Paper 2011-01-0301 [Google Scholar]
17. D. Ball, D. Clark, D. Moser, ‘Effects of Fuel Sulfur on FTP NOx Emissions from a PZEV 4 Cylinder Application’, SAE Paper 2011-01-0300 [Google Scholar]
18. C. H. Kim, K. Perry, M. Viola, W. Li, K. Narayanaswamy, ‘Three-Way Catalyst Design for Urealess Passive Ammonia SCR: Lean-Burn SIDI Aftertreatment System’, SAE Paper 2011-01-0306 [Google Scholar]
19. O. Guralp, G. Qi, W. Li, P. Najt, ‘Experimental Study of NOx Reduction by Passive Ammonia-SCR for Stoichiometric SIDI Engines’, SAE Technical Paper 2011-01-0307 [Google Scholar]