Skip to content
1887
  1. Home
  2. A-Z Publications
  3. Johnson Matthey Technology Review
  4. Volume 69, Issue 1
  5. Article
Volume 69, Issue 1
  • ISSN: 2056-5135
file format pdf download PDF

  • oa Magnetron Sputtering of Antibacterial and Antifungal Tantalum-Copper and Niobium-Copper Coatings on Three Dimensional-Printed Porous Titanium Alloy Scaffolds: Part I

    Optimal surface characteristics

  • Authors: Bagdat Azamatov1, Alexandr Borisov2, Bauyrzhan Maratuly3, Dmitry Dogadkin4, Yuliya Safarova (Yantsen)5, Ridvan Yamanoglu6 and Darya Alontseva7
  • Affiliations: 1 Smart Engineering Competence Centre, D. Serikbayev East Kazakhstan Technical University, 19 Serikbayev Street, 070010, Ust-Kamenogorsk, Kazakhstan 2 Smart Engineering Competence Centre, D. Serikbayev East Kazakhstan Technical University, 19 Serikbayev Street, 070010, Ust-Kamenogorsk, Kazakhstan 3 Smart Engineering Competence Centre, D. Serikbayev East Kazakhstan Technical University, 19 Serikbayev Street, 070010, Ust-Kamenogorsk, Kazakhstan 4 Smart Engineering Competence Centre, D. Serikbayev East Kazakhstan Technical University, 19 Serikbayev Street, 070010, Ust-Kamenogorsk, Kazakhstan 5 Laboratory of Bioengineering and Regenerative Medicine, National Laboratory Astana, Nazarbayev University, 010000, Astana, Kazakhstan 6 Department of Metallurgical and Materials Engineering, Faculty of Engineering, Kocaeli University, 41001, Kocaeli, Turkey 7 School of Digital Technologies and Artificial Intelligence, D. Serikbayev East Kazakhstan Technical University, 19 Serikbayev Street, 070010, Ust-Kamenogorsk, Kazakhstan
    Email: ¥[email protected]; §[email protected]; [email protected]; *[email protected]
  • Source: Johnson Matthey Technology Review, Volume 69, Issue 1, Jan 2025, p. 76 - 87
  • DOI: https://doi.org/10.1595/205651325X17157666493916
    • Received: 21 Feb 2024
    • Accepted: 14 May 2024

Abstract

This two-part study evaluates the antimicrobial efficacy of tantalum-copper and niobium-copper coatings, applied magnetron sputtering (MS) on three dimensional (3D) printed porous Ti6Al4V (Ti-64) alloy scaffolds and gas-abrasive treated Ti-64 alloy, against and . Scanning electron microscopy (SEM) with energy-dispersive X-ray (EDX) analysis verified the application of coatings with 25 wt% copper, at thicknesses of 2 μm and 10 μm, to scaffolds (72% porosity) and roughened Ti-64 alloy (mean areal roughness of 4.6 ± 1 μm). The findings support the potential of these coatings in developing endoprosthesis implants with enhanced antimicrobial properties. Part I introduces the background research and describes the materials, methods and rationale for the present work.

© 2025 Johnson Matthey
This is an Open Access article distributed in accordance with the Creative Commons Attribution Non Commercial (CC BY-NC 4.0) license, which permits others to distribute, remix, adapt, build upon this work non-commercially, and license their derivative works on different terms, provided the original work is properly cited and the use is non-commercial. See: http://creativecommons.org/licenses/by-nc/4.0/
Loading

Article metrics loading...

/content/journals/10.1595/205651325X17157666493916
2025-01-01
2024-12-21
Loading full text...

Full text loading...

/deliver/fulltext/jmtr/69/1/Azamatov_13a_Imp-Pt1.html?itemId=/content/journals/10.1595/205651325X17157666493916&mimeType=html&fmt=ahah

References

  1. J. Liu, N. B. Mohd Rafiq, L. M. Wong, S. Wang, Front. Chem., 2021, 9, 768007 LINK https://doi.org/10.3389/fchem.2021.768007
    [Google Scholar]
  2. A. Pandey, A. Awasthi, K. K. Saxena, Adv. Mater. Process. Technol., 2020, 6, (2), 405 LINK https://doi.org/10.1080/2374068x.2020.1731236
    [Google Scholar]
  3. V. Vishwakarma, G. Kaliaraj, K. A. Mosas, Coatings, 2023, 13, (1), 69 LINK https://doi.org/10.3390/coatings13010069
    [Google Scholar]
  4. J. Wilson, ‘Metallic Biomaterials: State of the Qrt, New Challenges’, in “Fundamental Biomaterials: Metals”, eds. P. Balakrishnan, M. S. Sreekala, S. Thomas, Elsevier Ltd, Duxford, UK, 2018, pp. 1–33 LINK https://doi.org/10.1016/B978-0-08-102205-4.00001-5
    [Google Scholar]
  5. J. W. Nicholson, Prosthesis, 2020, 2, (2), 100 LINK https://doi.org/10.3390/prosthesis2020011
    [Google Scholar]
  6. M. Kaur, K. Singh, Mater. Sci. Eng.: C, 2019, 102, 844 LINK https://doi.org/10.1016/j.msec.2019.04.064
    [Google Scholar]
  7. A. A. John, S. K. Jaganathan, E. Supriyanto, A. Manikandan, Curr. Sci., 2016, 111, (6), 1003 LINK https://doi.org/10.18520/cs/v111/i6/1003-1015
    [Google Scholar]
  8. M. Niinomi, ‘Titanium Alloys’, in “Encyclopedia of Biomedical Engineering”, eds. R. Narayan, M. Wang, C. Laurencin, X. Yu, Elsevier Inc, Amsterdam, The Netherlands, 2019, pp. 213–224 LINK https://doi.org/10.1016/b978-0-12-801238-3.99864-7
    [Google Scholar]
  9. L. E. Murr, J. Mater. Sci. Technol., 2019, 35, (2), 231 LINK https://doi.org/10.1016/j.jmst.2018.09.003
    [Google Scholar]
  10. M. Ribeiro, F. J. Monteiro, M. P. Ferraz, Biomatter, 2012, 2, (4), 176 LINK https://doi.org/10.4161/biom.22905
    [Google Scholar]
  11. B. Lindeque, Z. Hartman, A. Noshchenko, M. Cruse, Orthopedics, 2014, 37, (4), 257 LINK https://doi.org/10.3928/01477447-20140401-08
    [Google Scholar]
  12. B. Akhavan, S. G. Wise, M. M. M. Bilek, Langmuir, 2016, 32, (42), 10835 LINK https://doi.org/10.1021/acs.langmuir.6b02901
    [Google Scholar]
  13. D. Wojcieszak, D. Kaczmarek, A. Antosiak, M. Mazur, Z. Rybak, A. Rusak, M. Osekowska, A. Poniedzialek, A. Gamian, B. Szponar, Mater. Sci. Eng.: C, 2015, 56, 48 LINK https://doi.org/10.1016/j.msec.2015.06.013
    [Google Scholar]
  14. D. Wojcieszak, M. Osekowska, D. Kaczmarek, B. Szponar, M. Mazur, P. Mazur, A. Obstarczyk, Coatings, 2020, 10, (4), 343 LINK https://doi.org/10.3390/coatings10040343
    [Google Scholar]
  15. U. Walschus, A. Hoene, M. Patrzyk, S. Lucke, B. Finke, M. Polak, G. Lukowski, R. Bader, C. Zietz, A. Podbielski, J. B. Nebe, M. Schlosser, J. Funct. Biomater., 2017, 8, (3), 30 LINK https://doi.org/10.3390/jfb8030030
    [Google Scholar]
  16. D. Alontseva, B. Azamatov, Y. Safarova (Yantsen), S. Voinarovych, G. Nazenova, Coatings, 2023, 13, (7), 1175 LINK https://doi.org/10.3390/coatings13071175
    [Google Scholar]
  17. A. Kadyroldina, D. Alontseva, S. Voinarovych, L. Łatka, O. Kyslytsia, B. Azamatov, A. Khozhanov, N. Prokhorenkova, A. Zhilkashinova, S. Burburska, Mater. Sci.-Poland, 2022, 40, (4), 28 LINK https://doi.org/10.2478/msp-2022-0043
    [Google Scholar]
  18. D. L. Alontseva, B. Azamatov, S. Voinarovych, O. Kyslytsia, T. N. Koltunowicz, A. Toxanbayeva, Prz. Elektrotechnik, 2020, 1, (4), 154 LINK https://doi.org/10.15199/48.2020.04.32
    [Google Scholar]
  19. K. Pałka, R. Pokrowiecki, Adv. Eng. Mater., 2018, 20, (5), 1700648 LINK https://doi.org/10.1002/adem.201700648
    [Google Scholar]
  20. B. Gao, H. Zhao, L. Peng, Z. Sun, Micromachines, 2022, 14, (1), 57 LINK https://doi.org/10.3390/mi14010057
    [Google Scholar]
  21. R. Xia, Z. Zhai, Y. Chang, H. Li, Orthop. Surg., 2019, 11, (4), 533 LINK https://doi.org/10.1111/os.12468
    [Google Scholar]
  22. D. Tiberto, U. E. Klotz, F. Held, G. Wolf, Mater. Sci. Technol., 2019, 35, (8), 969 LINK https://doi.org/10.1080/02670836.2019.1600840
    [Google Scholar]
  23. R. Wang, S. Ni, L. Ma, M. Li, Front. Bioeng. Biotechnol., 2022, 10, 973297 LINK https://doi.org/10.3389/fbioe.2022.973297
    [Google Scholar]
  24. D. Alontseva, Y. Safarova (Yantsen), S. Voinarovych, A. Obrosov, R. Yamanoglu, F. Khoshnaw, H. I. Yavuz, A. Nessipbekova, A. Syzdykova, B. Azamatov, A. Khozhanov, S. Weiß, Coatings, 2024, 14, (2), 206 LINK https://doi.org/10.3390/coatings14020206
    [Google Scholar]
  25. ‘Implants for Surgery. Coatings on Metallic Surgical Implants - Plasma-Sprayed Coatings Derived from Titanium or Titanium-6 Aluminum-4 Vanadium Alloy Powders’, BS ISO 13179-1:2020 – TC, British Standards Institution, London, UK, 2020 LINK https://doi.org/10.3403/30420121
    [Google Scholar]
  26. ‘Implants for Surgery. Hydroxyapatite – Thermally Sprayed Coatings of Hydroxyapatite’, BS ISO 13779-2:2018 – TC, British Standards Institution, London, UK, 2018 LINK https://doi.org/10.3403/30302768
    [Google Scholar]
  27. ‘Standard Test Method for Tension Testing of Calcium Phosphate, Metallic Coatings’, ASTM F1147-05(2017)e1, ASTM, West Conshohocken, USA, 2017, 8pp LINK https://doi.org/10.1520/F1147-05R17E01
    [Google Scholar]
  28. R. Bernardie, R. Berkouch, S. Valette, J. Absi, P. Lefort, J. Mech. Sci. Technol., 2017, 31, (7), 3241 LINK https://doi.org/10.1007/s12206-017-0614-2
    [Google Scholar]
  29. Z. Chen, K. Zhou, X. Lu, Y. C. Lam, Acta Mech., 2014, 225, (2), 431 LINK https://doi.org/10.1007/s00707-013-0979-y
    [Google Scholar]
  30. G. A. Norambuena, R. Patel, M. Karau, C. C. Wyles, P. J. Jannetto, K. E. Bennet, A. D. Hanssen, R. J. Sierra, Clin. Orthop. Relat. Res., 2017, 475, (3), 722 LINK https://doi.org/10.1007/s11999-016-4713-7
    [Google Scholar]
  31. V. Stranak, H. Wulff, H. Rebl, C. Zietz, K. Arndt, R. Bogdanowicz, B. Nebe, R. Bader, A. Podbielski, Z. Hubicka, R. Hippler, Mater. Sci. Eng.: C, 2011, 31, (7), 1512 LINK https://doi.org/10.1016/j.msec.2011.06.009
    [Google Scholar]
  32. S. Wu, X. Shen, M. Chen, K. H. R. Yie, Z. Zhou, M. A. Al-Baadani, K. Fang, A. M. Al-Bishari, Z. Deng, J. Liu, L. Yao, Mater. Sci. Eng.: C, 2021, 120, 111777 LINK https://doi.org/10.1016/j.msec.2020.111777
    [Google Scholar]
  33. V. Stranak, H. Wulff, P. Ksirova, C. Zietz, S. Drache, M. Cada, Z. Hubicka, R. Bader, M. Tichy, C. A. Helm, R. Hippler, Thin Solid Films, 2014, 550, 389 LINK https://doi.org/10.1016/j.tsf.2013.11.001
    [Google Scholar]
  34. A. Wang, I. P. Jones, G. Landini, J. Mei, Y. Y. Tse, Y. X. Li, L. Ke, Y. Huang, L. Liu, C. Wang, R. L. Sammons, J. Microsc., 2017, 270, (1), 53 LINK https://doi.org/10.1111/jmi.12649
    [Google Scholar]
  35. M. Kalisz, M. Grobelny, M. Mazur, D. Wojcieszak, M. Şwiniarski, M. Zdrojek, J. Domaradzki, D. Kaczmarek, Surf. Coatings Technol., 2015, 271, 92 LINK https://doi.org/10.1016/j.surfcoat.2015.01.002
    [Google Scholar]
  36. Z. Ding, Q. Zhou, Y. Wang, Z. Ding, Y. Tang, Q. He, Ceram. Int., 2021, 47, (1), 1133 LINK https://doi.org/10.1016/j.ceramint.2020.08.230
    [Google Scholar]
  37. T. C. Senocak, K. V. Ezirmik, F. Aysin, N. Simsek Ozek, S. Cengiz, Mater. Sci. Eng.: C, 2021, 120, 111662 LINK https://doi.org/10.1016/j.msec.2020.111662
    [Google Scholar]
  38. A. Bahrami, C. F. Onofre Carrasco, A. D. Cardona, T. Huminiuc, T. Polcar, S. E. Rodil, Surf. Coatings Technol., 2019, 364, 22 LINK https://doi.org/10.1016/j.surfcoat.2019.02.072
    [Google Scholar]
  39. A. Bahrami, J. P. Álvarez, O. Depablos-Rivera, R. Mirabal-Rojas, A. Ruíz-Ramírez, S. Muhl, S. E. Rodil, Adv. Eng. Mater., 2017, 20, (3), 1700687 LINK https://doi.org/10.1002/adem.201700687
    [Google Scholar]
  40. A. B. Behboud, A. Fadaie, A. Motallebzadeh, S. Şehirli, S. Özerinç, J. Alloys Compd., 2024, 979, 173331 LINK https://doi.org/10.1016/j.jallcom.2023.173331
    [Google Scholar]
  41. S. Zhao, S. Liu, Y. Xue, N. Li, K. Xu, W. Qiu, X. Li, J. Wang, Q. Wu, C. Shi, Coatings, 2023, 13, (7), 1234 LINK https://doi.org/10.3390/coatings13071234
    [Google Scholar]
  42. H. A. Hameed, A. Ariffin, N. Luddin, A. Husein, J. Pharm. Sci. Res., 2018, 10, (5), 1157
    [Google Scholar]
  43. I. Ilievska, V. Ivanova, D. Dechev, N. Ivanov, M. Ormanova, M. P. Nikolova, Y. Handzhiyski, A. Andreeva, S. Valkov, M. D. Apostolova, Coatings, 2024, 14, (4), 455 LINK https://doi.org/10.3390/coatings14040455
    [Google Scholar]
  44. E. A. Lewallen, W. H. Trousdale, R. Thaler, J. J. Yao, W. Xu, J. M. Denbeigh, A. Nair, J.-P. Kocher, A. Dudakovic, D. J. Berry, R. C. Cohen, M. P. Abdel, D. G. Lewallen, A. J. van Wijnen, Tissue Eng. Part A, 2021, 27, (23–24), 1503 LINK https://doi.org/10.1089/ten.TEA.2020.0369
    [Google Scholar]
  45. B. Jahani, X. Wang, Biomed. J. Sci. Tech. Res., 2021, 38, (1), 30058 LINK https://doi.org/10.26717/bjstr.2021.38.006104
    [Google Scholar]
  46. B. N. Azamatov, D. L. Alontseva, A. A. Borisov, B. Maratuly, V. B. Ogay, A. A. Kurmanbaev, Bull. D. Serikbayev EKTU, 2022, (3), 40 LINK https://doi.org/10.51885/1561-4212_2022_3_40
    [Google Scholar]
  47. F. Schwarz, K. Becker, S. Rahn, A. Hegewald, K. Pfeffer, B. Henrich, Int. J. Implant Dent., 2015, 1, (1), 9 LINK https://doi.org/10.1186/s40729-015-0010-6
    [Google Scholar]
  48. M. Alrabiah, R. S. Alshagroud, A. Alsahhaf, S. A. Almojaly, T. Abduljabbar, F. Javed, Clin. Implant Dentist. Relat. Res., 2019, 21, (4), 781 LINK https://doi.org/10.1111/cid.12760
    [Google Scholar]
  49. M. Mouhat, R. Moorehead, C. Murdoch, Biomater. Investig. Denist., 2020, 7, (1), 146 LINK https://doi.org/10.1080/26415275.2020.1829489
    [Google Scholar]
  50. ‘Implants for Surgery. Metallic Materials - Wrought Titanium 6-Aluminium 4-Vanadium Alloy’, BS EN ISO 5832-3:2012, British Standards Institution, London, UK, 2016 LINK https://doi.org/10.3403/00977375
    [Google Scholar]
  51. H. Tiainen, S. P. Lyngstadaas, J. E. Ellingsen, H. J. Haugen, J. Mater. Sci.: Mater. Med., 2010, 21, (10), 2783 LINK https://doi.org/10.1007/s10856-010-4142-1
    [Google Scholar]
  52. A. A. Zadpoor, Acta Biomater., 2019, 85, 41 LINK https://doi.org/10.1016/j.actbio.2018.12.038
    [Google Scholar]
  53. H. Montazerian, M. G. A. Mohamed, M. M. Montazeri, S. Kheiri, A. S. Milani, K. Kim, M. Hoorfar, Acta Biomater., 2019, 96, 149 LINK https://doi.org/10.1016/j.actbio.2019.06.040
    [Google Scholar]
  54. T. Arahira, M. Maruta, S. Matsuya, M. Todo, Mater. Lett., 2015, 152, 148 LINK https://doi.org/10.1016/j.matlet.2015.03.128
    [Google Scholar]
  55. N. Arabi, A. Zamanian, S. N. Rashvand, F. Ghorbani, Macromol. Mater. Eng., 2018, 303, (3), 1700539 LINK https://doi.org/10.1002/mame.201700539
    [Google Scholar]
  56. B. Azamatov, A. Borisov, B. Maratuly, D. Dogadkin, Y. Safarova (Yantsen), R Yamanoglu, D. Alontseva, Johnson Matthey Technol. Rev., 2025, 69, (1), 88 LINK https://doi.org/10.1595/205651325X17302963281360
    [Google Scholar]
/content/journals/10.1595/205651325X17157666493916
Loading
Magnetron Sputtering of Antibacterial and Antifungal Tantalum-Copper and Niobium-Copper Coatings on Three Dimensional-Printed Porous Titanium Alloy Scaffolds: Part I
Johnson Matthey Technology Review 69, 76 (2025); https://doi.org/10.1595/205651325X17157666493916
/content/journals/10.1595/205651325X17157666493916
/content/journals/10.1595/205651325X17157666493916
Loading

Data & Media loading...

  • Article Type: Review Article
Keyword(s): additive manufacturing; bacterial resistance; magnetron-sputtered coating; selective laser melting; titanium endoprosthesis implants

Most Cited Most Cited RSS feed

This is a required field
Please enter a valid email address
Approval was a Success
Invalid data
An Error Occurred
Approval was partially successful, following selected items could not be processed due to error
Please enter a valid_number test